Kandou to Demonstrate USR SerDes IP, USB4 Retimer at DesignCon 2020
Two DesignCon Technical Sessions Showcase Kandou’s Signal Integrity Expertise Download PDF Kandou, an innovative leader in high-speed, energy efficient, chip link solutions, will demonstrate its ultra-short reach (USR) SerDes intellectual property (IP) and USB-C® multiprotocol retimer solution with USB4™ support at DesignCon 2020. Demonstrations will be held in…
![Kandou to Demonstrate USR SerDes IP, USB4 Retimer at DesignCon 2020](https://w.kandou.com/wp-content/uploads/2023/05/design-con-hero-640x400.jpg)
Two DesignCon Technical Sessions Showcase Kandou’s Signal Integrity Expertise
Kandou, an innovative leader in high-speed, energy efficient, chip link solutions, will demonstrate its ultra-short reach (USR) SerDes intellectual property (IP) and USB-C® multiprotocol retimer solution with USB4™ support at DesignCon 2020.
Demonstrations will be held in the Kandou Booth (#209) Wednesday and Thursday, January 29-30, from 11 a.m. until 6 p.m. at the Santa Clara Convention Center, Santa Clara, Calif.
Additionally, Sherman Chen, signal integrity lead at Kandou, will present The Impact of Return Loss on Chord™ Signaling and Power Coupling Extraction Method Comparison. Both will be held Thursday, January 30, as part of the DesignCon technical program.
A demonstration of Kandou’s Glasswing™ USR SerDes IP for chip-to-chip links inside a shared multi-chip module (MCM) package will profile its efficiency as the first USR SerDes that consumes only 1pJ per bit while delivering 500 Gbit/s without requiring a silicon interposer. Glasswing utilizes a 5-bit over 6-wire signaling structure called CNRZ-5, part of Kandou’s Chord™ signaling technology portfolio.
The demonstration will feature Keysight Technologies’ test solutions that leverage the multi-channel acquisition system of the N1000A DCA-X wide-bandwidth oscilloscope and its N1010100A FlexDCA R&D software to decode and analyze Chord™ Signaling transceivers.
A second demonstration will showcase Matterhorn, the industry’s first USB-C multiprotocol retimer solution with USB4 support. The demo will highlight the benefits of Kandou’s USB Type-C® 40 Gbit/s multiprotocol switch and bidirectional bit-level retimer solution for faster video processing and data transfer connections to drive next-generation USB-enabled devices. Matterhorn follows the USB Implementers Forum (USB-IF) specification for USB4 and targets a wide range of applications, including mobile, tablet and desktop PCs, active cables, docking stations and gaming consoles.
Chen’s The Impact of Return Loss on Chord™ Signaling presentation will investigate the impact of Return Loss on the performance of Chord™ Signaling (ENRZ), compare it with NRZ and PAM4, and offer guidelines for designing optimal Chord™ Signaling channels. It will be held Thursday, January 30, at 8 a.m. in the convention center’s Ballroom E.
Power Coupling Extraction Method Comparison, a session sponsored by Cadence Design Systems and also presented by Chen, will compare PDN models obtained with a 2.5D extractor and a 3D full wave solver. Design guidelines on selecting the best approach for different design scenarios will be available. It will be held in the convention center’s Mission City M1 Thursday, January 30, at 2 p.m.
Press Contact
Jeff McGuire
VP Business Development
(+1) 303-903-9244
Nanette Collins
Public Relations for Kandou
(+1) 617-437-1822
nanette@nvc.com
Disclaimer
Kandou acknowledges trademarks or registered trademarks of other organizations for their respective products and services.